Spares

Spares

Spares

As part of our commitment to original Nytech and Ion equipment owners and to keep these excellent sounding amplifiers going for many more years, we offer the following services and spares.
 

Please note that unless otherwise stated replacement circuit boards and modules are supplied on an "exchange" basis which means that you have to send us your old board or module to obtain a replacement.
All replacement exchange boards are fully re-capped using audio grade electrolytics and polypropylene film capacitors and new female molex connectors and are guaranteed for a year from the date of invoice.

 

Most case parts, knobs and buttons are no longer available, however we may be able to help with certain parts from equipment donated to us as beyond economic repair.

 

We are currently looking into the possibilities of case refurbishment for the metal cased items (CPA602, CP112, EXO102/3, CA202/252/302)

 

Most electrical spares are still available (or the modern equivalents) with the exception of most of the slider controls and the push fit DIN sockets (a replacement Din socket kit is now available).

 

We are looking into the possibility of a replacement rear panel for the early three button CA252 / 202 and CP112 preamp with RCA phono sockets for input and XLR output / Link sockets rather then DIN sockets.

 

Contact us for the latest details on this.


Display per page
Sort by

Replacement refurbished power amp modules for the CTA252/XD/XDII, CXA252, CA252 (three button) and CA202 (three button).

Please Note - These are only available on an exchange basis and are supplied as a matched pair.

£50.00 / 2 unit(s) *

The phono input board is available as a straight exchange replacement or a swap if you want to convert between moving magnet and moving coil inputs.

£25.00 / unit(s) *

This is the 5 pin Din "Link" plug used to link the Preamp out / Poweramp in on the CTA252, CA252 and CA302. It's needed for the CTA and CA252 and also for the CA302 if the internal links have been cut.

£5.00 / unit(s) *

This is the preamp board used in the CP112 preamp and first generation CA252 amplifiers.

Available as an exchange replacement

£50.00 / unit(s) *

This is the main tuner board used in the CTA252XD and CTA252 XDII.

Contact us if you need a tuner board for the original (Red label) CTA252.

Available as an exchange replacement

£100.00 / unit(s) *

The preamp board for all versions of the CTA252 and theCTP102.

Available as an exchange replacement

£50.00 / unit(s) *

A replacement high DIN socket and plastic mounting cheeks to replace the original "clip in" din sockets found in classic Nytech equipment

£10.00 / unit(s) *

A service kit for the CA252 Integrated amplifier to replace all the electrolytic and metal film capacitors. Also included are high quality 4mm terninal posts to replace the original speaker sockets.

Please verify which version of the CA252 you have before ordering (Mk1 or Mk2) as the parts lists and component numbers differ between versions

From £52.00 / unit(s) *

Service kits for all versions of the CTA252 Tuner amplifier and both versions of the CTP102 Tuner preamp.

Please verify which version you have before ordering as there are quite a few variations.

From £135.00 / unit(s) *

A service or upgrade kit for the CXA252 Electronic crossover / amplifier.

The service kit includes all capacitors and new 4mm speaker posts

The upgrade kit includes a new electronic crossover board which offers a significant improvement of sound quality and much greater overload headroom than the original board.

From £45.00 / unit(s) *

This is our new electronic crossover board which can be used to upgrade or replace the original crossover board in the CXA252 and EXO102/3.

It's a plugin replacement for the original crossover board and is ideal for owners of CXA252s who no longer have the crossover card(s).

We have also made a "non filtered" version for those of you who wish to use a CA/CXA to run bi-wirable speakers "Bi-amped" (each drive unit has its own power amplifier).

Please select your Xover type when ordering.

A set of boards for the three way EXO103 is also available (2 boards).

From £100.00 / unit(s) *

Badge for classic Nytech equipment

£5.00 / unit(s) *

This is a kit to replace the original sticky pads which held on the metal based trim for most classic Nytech equipment.

£15.00 / unit(s) *
*
Prices plus delivery